Alum-A-Lift is a
manufacturer of custom built, ergonomic
lifting devices (battery powered and motor driven) for loads up to
900kg (2000lbs) and 3m (10ft) high. Alum-A-Lift also specializes in
portable & transportable lifts. All lifts are configured to a
customer’s application to solve ergonomic lifting problems
and
assist in preventing back injury. Alum-A-Lift replaces those heavy,
outdated lifts with light-weight, maneuverable aluminum ones that are
compliant to various Health & Safety Standards requirements.
Alum-A-Lift has been tested & certified for use in class 100
clean
rooms. A wide range of custom job related tooling is also available. There
are a few select, popular
lifts available for quick delivery; however, most lifts are customized
to solve defined lifting problems. Construction complies with all known
applicable standards and each lift is thoroughly tested to perform its
intended tasks prior to shipment. There are no multiple packages and no
need to search for missing assembly parts. Alum-A-Lift is received
ready to run after connecting its battery. Maintenance manuals,
operating instructions, safety procedures, tool kits and the approved
lubricant accompany each lift. Lift commissioning and training
programs, if required, are conducted by either factory trained
representatives or by our design engineers.
Unlike
single mast designs,
Alum-A-Lift constructions can withstand considerable off-centre loads.
Stabilizers allow such loads and precision alignment. When heavy loads
are specified, affected construction elements are subjected to stress,
strain and deflection analyses (F.E.A.). Footprints are calculated to
assure compliance with stability criteria.
Most
models come with built-in, variable limit switches to define upper and
lower elevations. If the load is sensitive or expensive, redundant
systems are used. In contrast to some lift makes, 12 volts are applied
to motors rated at 12 volts and 24 volts to 24 volt motors. Batteries
are readily accessed and are easily replaced when required.
Job
related tooling is are
designed by Alum-A-Lift's permanent engineering staff; constructed and
tested in-house from a single source that is responsible for the entire
product. There is no need for third party out-sourcing, divided
responsibility and the resulting complications. Job related tooling may
be specified for manual or powered operation. Ergonomic and
anthropomorphic tables are employed to help make such determinations.
For
further information on
Alum-A-Lift capabilities within the converting & packaging
website,
visit their packaging website www.alum-a-pack.com.
Alternatively, for all other lifting requirements visit www.alum-a-lift.com.
If you require an Alum-A-Lift trained representative to assess your
lift requirements within the UK, then please contact Rimor via our contact page
and we will get back to you as soon as we can.
|
